Vapour smoothing produces 3D printed parts with enhanced surface finish

Additive Manufacturing Vapour smoothing produces 3D printed parts with enhanced surface finish

27.01.2022Source: Press release

With the launch of vapour smoothing for 3D printed parts, Protolabs has announced a major breakthrough. According to the company, the post-processing automated technology is a significant advancement for additive manufacturing because it further enhances a plastic part’s surface finish on even the most complex geometries.

Whilst 3D printing allows an engineer to design and produce complex parts and is ideal for low production runs when compared to injection moulding, the surface finish of the latter is far smoother. The new vapour smoothing for 3D printed parts from Protolabas bridges that gap for additive manufactured parts to smooth and seal even small cavities on the surface. It is currently available for the commonly used nylon material PA-12, plus the elastic material TPU-01. This allows parts in these materials to be used for a wider range of applications that demand a very fine smooth finish for aesthetic and functional reasons.

The process also improves a part’s mechanical properties with increased elongation at break and impact strength, whilst the sealed and smoother surfaces are also water/airtight and are easier to clean. Because the finishing process is automated, it can be used for far more geometries than a manual smoothing process, which can be limited due to reaching difficult to access areas. This means that users can have all the advantages of additive manufacturing for parts and achieve a surface finish that is comparable to injection moulding.

Improved water tightness opens up a number of applications, including tanks, fluid bearing pipes and ducts, valve covers and oil sumps, with the medical sector and other industrial applications set to benefit from ease of cleaning due to a smoother surface.

Following production of the parts using selective laser sintering (SLS) or Multi Jet Fusion (MJF), the team at Protolabs transfer the parts into a smoothing chamber which heats them and introduces a finishing agent.

Under carefully controlled conditions, this agent evaporates and the vapour spreads across all surfaces of the part. This causes them to melt, liquify and redistribute material to even out any peaks and troughs and seal even the smallest cavity

(ID:47961868)